Tag: DIY
-
DIY Pallet Wood Lounge Chair
A Lounge Chair Built From Broken-Down Pallets This one started as a stack of pallets in the bed of the truck. By the time it was done, it was a low-slung outdoor lounge chair: the kind you sit back into rather than up on, with a reclined backrest and a seat that sits close to…
-
DIY Chevron Trash Can Built From Reclaimed Wood
This is the smallest piece in an ongoing chevron series: a reclaimed wood trash can cover with a mitered chevron-pattern lid and a carved wood handle. It uses the same mitered-board motif as a Chevron Coffee Table, a Chevron Outdoor Bench, and a full Chevron Patio Set, just applied at a much smaller scale, which…
-
DIY Vinyl Record Storage Crate With Reinforced Mitered Corners
This is the smaller, standalone companion to the record-player media console built earlier this year: a mitered plywood crate sized to hold a stack of vinyl records upright, with the corners cut at 45 degrees and reinforced with glued-in wood splines rather than just butt-joined and screwed together. It’s built to be sold on its…
-
OSB Nightstand with a Black-Painted Edge Accent
OSB (oriented strand board) doesn’t usually get treated as a furniture material: it’s the stuff behind the drywall, not the stuff you’d want visible in a bedroom. This nightstand argues otherwise. It’s a simple two-shelf open box built almost entirely from OSB, left raw everywhere except for one deliberate move: the front-facing edges are painted…
-
Mid-Century Record Player Stand With Sound Bar & Vinyl Storage
This media console was built to hold a turntable on top, a sound bar in its own dedicated shelf, and a full vinyl collection underneath, all in one birch plywood piece with a mid-century-modern, walnut trim. What It Replaced Before this console existed, the setup was exactly what most vinyl collections end up as: a…
-
Vertical Kerf-Cut Knife Block: A Hollow, Open-Front DIY Build
Most DIY knife block plans start with a solid block of hardwood and a drill press: bore a series of angled holes, and you’re done. This one took a different path: a tall, narrow, fully hollow plywood carcase with the knife slots cut as straight saw kerfs across the top edge, plus one larger open…
-
The Poplar End Table: A Budget-Friendly Two-Tier Build
Poplar doesn’t get much love in furniture circles: it’s usually the wood you paint, not the wood you show off. This end table makes the case for using it anyway: a simple two-tier design with tapered outer legs and an open lower shelf, finished in a warm stain that turns an inexpensive board into a…
-
IKEA Malm Dresser Hack: Rebuilding It in OSB Plywood
How an IKEA Malm chest of drawers became the starting point for a fully custom OSB plywood dresser — raw carcass, salvaged drawer hardware, and a matte black finish.
-
DIY Industrial Pipe Clothing Rack — Two Builds, Two Looks
A clothing rack built from threaded black pipe fittings, documented through two real builds — an all-pipe rolling-cart version and a redesigned wood A-frame with two shelves and a shorter pipe accent rail.
-
Building a Birch Plywood Cabinet Box: Glue-Up and Assembly
A birch plywood cabinet carcass caught mid-build — panels labeled and marked, corners notched and clamped square, an interior shelf glued in place. No finished photos exist yet for this one; this post documents the assembly stage honestly, as it was shot.